We have seen a lot of fence railings, whether it is the wall beside the highway, or the wall outside the community, or the fence of our own yard. The formation of these walls is basically the presence of railings. Of course, there are individual walls that are made of bricks, but most of them are still used. The following small series for everyone to introduce the practice of wall railings and wall railings characteristics.
Wall railing practice
1. Preparation
Regardless of which step to take next, please prepare a work table before installing the fence rails.
2, install waterproof mat
The rails of the prepared railings are arranged neatly according to the length of the length, and a PTE waterproof pad is installed on the side of the crossbar through holes.
3, install a fixed vertical bar
Put all the same-sized crossbars on the work table that you prepared before. You need to pay attention here. Remember to put the waterproof pads on one side and do not put them in a mess. Then insert the vertical rod with the screw hole into the crossbar from the opposite side of the waterproof pad.
4, fastening screws
Using a larger-sized flathead screwdriver, tighten the screws in the clockwise direction to fix the vertical bar and the crossbar to form a frame for the fence.
5, install ordinary vertical rod
When the frame of the wall railing is set up, the normal vertical bar can be installed. Find the vertical rods with two through holes at the bottom and insert them in the same direction as the root insertion bar.
6, install the upper and lower cards
Distinguish between the upper and lower cards, the big card is the upper card, the small card is the lower card. When installing the upper and lower position cards, it should be noted that the upper position card should be installed first, and the U-shaped opening side of the clamp should be inserted into the vertical bar.
7, fixed clip to the slot position
Use a special chuck tool to push the card to the slot and automatically eject it. Then install the lower card in the above manner. If the installation is wrong, you can use a flathead screwdriver to reach the vertical bar to flush the clip.
8, assembled
Assembling is the final step in the installation of fence rails. After pressing UNG, check whether each pole is in place and complete the assembly work.
Wall railing features
1. Safety: High-strength zinc alloy is used, and after T5 heat treatment, it is uniquely designed and formed integrally. It has no solder joints, and the overall strength is greatly improved.
2, the appearance of beauty: streamlined appearance, soft colors, can coordinate the surrounding landscape, can be combined with modern urban space and natural environment, allowing you to travel.
3, comfort: Looking far away, viewing the scenery, to provide you with a comfortable and safe platform.
4, practicality: the surface of a special process, the formation of a permanent protective film, smooth, never rust, easy to clean, no maintenance.
5, weather resistance: This product is characterized by its aluminum alloy, the surface after undergoing special treatment, so whether in the air pollution of the city or sea salt corrosion of the coastal areas, can be used with peace of mind for you to solve the maintenance of worries.
Wall railing function
The column of the wall railing is fixed to the ground by means of expansion bolts. It is usually installed on both sides of the logistics channel, the periphery of the production equipment, the corners of the building, the sides of the door, the edge of the cargo bed, and so on. In addition, the logistics handling equipment itself also plays a protective role. For example, the guardrail at the edge of the loading platform prevents the forklift from falling accidentally.
Fence guardrails are used in many places where we work and produce, especially when some fences are used on some construction sites. This will provide a great guarantee for the safe work of the project through the use of fence guardrails.
Editor's summary: The wall railing practices and wall railings features are introduced here, and we hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Living room glass partition wall balcony wall decoration attic bedroom partition wall style sofa wall background wall wall hanging shelf wall railing practice
4-Amino-benzenesulfonic acid monosodium salt
CAS No. 515-74-2
Chemical Name: 4-Amino-benzenesulfonic acid monosodium salt
Synonyms: Ccris 7446;Einecs 208-208-5;SODIUM SULFANILATE;sodiumsulphanilate;Sodium sulfanylate;SODIUM ANILINESULFONATE;AMino benzene sulfonate;4-AMPYRONE 99% HIGH GRADE;4-SULFOANILINE SODIUM SALT;p-Sulfoaniline sodium salt
CBNumber: CB4320016
Molecular Formula: C6H6NNaO3S
Usage The Sodium salt of 4-Acetamidobenzenesulfinic Acid, a component used in the preparation of Cyanine dyes.
Aniline-p-sulfonic Acid Sodium Salt
Deoxycholic Acid,Acid Disodium Salt,Acid Sodium Salt,Ester Sodium Salt
FORING IMPORT & EXPORT CO.,LTD , https://www.foringfor.cn