Water Pump Unit Installation Requirements and Installation Plan

1. Installation Requirements for Pump Units Installation units must install technical force for installing pump units, organize installation and construction design, and formulate installation and construction network plans. The supervising engineer shall organize the design, manufacture and construction units according to the specific conditions of the pump station to make technical disclosures and coordinate with each other. After the inspection and approval of the installation and construction organization design, the supervisory engineer will issue the order and the construction unit can enter the site for installation and construction. A construction organization shall be set up, a person in charge of a single project shall be established, the scope of duties shall be defined, and the direction shall be unified. The installation personnel should carefully study the technical data, be familiar with the drawings, master the regulations, specifications and relevant technical regulations, and master the installation procedures, methods and requirements so that the installation quality meets the design requirements.

2. Installation Plan of Pump Unit The installation plan is the main part of the construction work. Content includes: installation process, installation schedule, etc. In the installation plan, the construction sequence and construction schedule shall be clearly defined. The individual projects, the division projects and their engineering quantities in the entire project shall be listed, and the main, sub, first, and later shall be separated, and the construction period, personnel composition and each construction stage shall be reasonably arranged. The main task is to make the construction progress of each project take care of each other and connect with each other.

Sold Double Side Tape, Joint Wrap Tape, Inner Tape , Bitumen Tape in China.

Cold applied coating tape Composition:It is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue.

Usage: It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation

Thickness: 0.30 - 2.0 mm

Color : Black white
Other name: inner tape, cold wrap tape
Thickness :15 mil to 35 mil
Width: 50, 100, 150, 200, 300 mm
Length : 10, 20, 25, 30, 50,120 meter
Certificate :ISO 9001, ISO 14001,OHSMS 18001,SGS
Standard : ASTM D 1000, AWWA C 214
Temperature: 10 to 60 degree c

China professional manufacturer of Bitumen Tape, Inner Tape, Joint Wrap Tape, Double Side Tape. Welcome Purchasers from Worldwide to Visit Our Site.

Anticorrosion Pipe Wrap Tape

Double Side Tape, Joint Wrap Tape, Inner Tape, Bitumen Tape

Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com