In recent years, floor heating has become popular in the heating industry, and there are more and more households installing floor heating. As we all know, the installation of the floor heating system is related to the effect of heating in the future. As a core component of the floor heating, the installation of the floor heating boiler cannot be taken lightly. Few user systems understand the installation knowledge of home floor heating boilers. Today, Jia Jiaju.com will give you a summary of the things that have to be known for the installation of home floor heating boilers .
Household floor heating boiler installation - installation conditions
Before the installation of the home floor heating boiler, the heating system should be installed in the home. The grooving, drilling, and pipeline operations have been completed, and a gas supply is required. In order to choose a suitable location to suspend the floor heating boiler, it is necessary to take into account the requirements of exhaust gas emission and antifreeze. The closer to the heating system, gas, power supply, water source and exhaust outlet, the better, and the location that is easy to operate and easy to overhaul. In general, we can choose to be in the kitchen, balcony and other locations.
Home floor heating boiler installation - installation steps
1. Set the flue and heat insulation to open the flue mouth, reserve enough pipe diameter, and apply thermal insulation protection on the heat-resistant wall.
Second, install the template and the hook to drill holes in the wall, fix the template bracket to the wall with fixing bolts, reserve 10mm holes on both sides, install bolts and hooks. Then install the exhaust valve at the highest point of the system and install the filling and drain valves at the lowest point.
Third, install the floor heating boiler to remove the boiler to the outer wall mounted on the wall hook, and connect the flue and other pipes, then connect the power supply and temperature controller, install the outer casing.
4. Water injection leak detection Water injection leak detection is a step that cannot be omitted for the installation of the floor heating boiler. Open the water inlet switch and the water injection switch, fill the heating system, add the pressure to 3, check whether there is a leak after stopping the water injection, and pay attention to the safety valve. Whether to relieve pressure. Also test the gas line for leaks with soapy water. If there is no problem, open the drain valve and lower the pressure to 1.
The above is the installation knowledge of the floor heating boiler that Xiaobian has arranged for you. If you want to know more information, you can pay attention to the official website of our home.
Cup 3D Mask Machine,Fold Flat 3D Mask Machine Online,Kn95 Certified 3D Mask Machine Online,N95 Certified 3D Mask Machine
Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.aitopsolution.com