Series Hard Hat Instructions for Use WARNING Failure to follow this warning and use instructions will expose the user to serious injury or death. The use of this helmet can provide limited protection to the head. You need to verify with your safety or regulatory staff that the helmet can provide adequate protection against shock and/or insulation in your work environment.
This helmet can reduce but not eliminate the force that objects hit the top of the helmet. For objects hitting the front of the helmet, the back and sides provide limited protection.
If the workplace suffers from front, rear and side impacts, use a safety helmet with internal cushion to provide better protection. ,
Commissioning Depending on the model selected, turn the adjustment knob or slide adjustment to the desired position and snap the buckle into the corresponding hole in the headband to fit the helmet to the size of the head. Tie the headband tightly so that it does not bend over (head down), or when you nod your head and shake it, the helmet slips off of your head due to its own weight. This helmet can be worn backwards, with the visor behind the head and the headband reversed to place the sweatband on the forehead. Follow the headband replacement instructions below. Inspection and cleaning Please check the cap and headband periodically. Clean with warm detergent at 60°C (140) warm water and rinse with water. Any impact on the helmet, or any damage to the appearance of the shell, damage, deterioration, aging and discoloration, replace the entire part.
These conditions may be impact, exposure to paint, solvents or other chemicals, or long-term exposure to direct sunlight or other radiation. Head with soiling, tearing or destruction replace it. Only use headgear replacements designed for this helmet
This helmet can reduce but not eliminate the force that objects hit the top of the helmet. For objects hitting the front of the helmet, the back and sides provide limited protection.
If the workplace suffers from front, rear and side impacts, use a safety helmet with internal cushion to provide better protection. ,
Commissioning Depending on the model selected, turn the adjustment knob or slide adjustment to the desired position and snap the buckle into the corresponding hole in the headband to fit the helmet to the size of the head. Tie the headband tightly so that it does not bend over (head down), or when you nod your head and shake it, the helmet slips off of your head due to its own weight. This helmet can be worn backwards, with the visor behind the head and the headband reversed to place the sweatband on the forehead. Follow the headband replacement instructions below. Inspection and cleaning Please check the cap and headband periodically. Clean with warm detergent at 60°C (140) warm water and rinse with water. Any impact on the helmet, or any damage to the appearance of the shell, damage, deterioration, aging and discoloration, replace the entire part.
These conditions may be impact, exposure to paint, solvents or other chemicals, or long-term exposure to direct sunlight or other radiation. Head with soiling, tearing or destruction replace it. Only use headgear replacements designed for this helmet
We are factory which specializing producing and distribute hot melt Glue Guns. Main category include 10W, 20W, 40W,60W,100W,200W, 250W with cord and cordless glue guns. All glue guns been GS,CE,KTC, SAA, CSA,INMETRO approval.
Our Professional Glue Gun designed for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY craft projects.
High Quality Hot Melt Glue Gun
Glue Guns, Industrial Glue Gun, Hot Melt Glue Gun, Silicone Glue Gun
Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com