Talking about the characteristics and use of thin and ultra-thin stone

First, the characteristics of thin and ultra-thin stone

Thin stone refers to the stone plate with thickness between 10mm and 15mm. It is an important product of the stone industry in the 1990s. It is divided into marble sheet and granite sheet. Ultra-thin stone refers to all kinds of stone sheet with stone thickness below 10mm. . Usually the thickness of the granite plate is only 8mm~10mm, and the specification is 305mm*305mm. However, for many years of painstaking research and practice in the stone industry, the marble plate can now be as thin as 2mm, and the maximum size can be 1200mm*2400mm (the thickness increases with the increase of the specification): the thickness of the granite plate is the thinnest Up to 3mm, the maximum size can be 1200mm*1200mm, which is the thinnest marble and granite stone tile. The thin and ultra-thin natural stone has the biggest advantages of small size, light weight, natural color, uniform water absorption, solid and durable, easy to transport, colorful, can be made into the specifications of ordinary tiles, and widely used, with ordinary bonding. The agent (dry powder paste) can be fixed on the wall and is a fashionable building material.

The thin and ultra-thin natural stone is currently available in various specifications such as 305mm*305mm, 600mm*400mm, 1600mm*600mm, 600mm*900mm, 800mm*800mm, 1050mm*1050mm, 1200mm*1200mm, 1200mm*2400mm, etc. The thickness ranges from 2mm to 10mm, and it can basically meet various needs according to the needs of users.

The thin and ultra-thin products are light in weight, only one-third of the ordinary plates. According to the data, the ultra-thin plates of 6 mm thick are less than 18 kg per square meter, and the ultra-thin stone of 8 mm thick is less than 25 kg. From the design point of view: can reduce the amount of steel and concrete in the overall structure of the building, and greatly reduce the overall material cost of the building; in the construction: easy installation, less cost, can use stone special glue paste method (dry powder Paste) is applied, and the ordinary board is installed by cement mortar inlay or steel keel hanging method. Compared with the two, the special glue sticking method has the characteristics of convenient purchase, less dosage and easy operation, and it is easy to operate. It can be completed by Yiren, which not only reduces the raw material cost of the building, but also saves more than 60% of the man-hours for decoration and decoration. At the same time, the special glue for stone has good water retention and isolation, so that the pollution of the stone decoration and decorative surface due to cement efflorescence and the occurrence of water spots and Baihua are avoided.

Thin and ultra-thin natural stone is cost-effective because of its “thinness”. It is widely regarded as one of the most ideal green building materials in the 21st century because of its thin, light and transparent characteristics. Not only can the cost of stone decoration be reduced, but also the limited precious stone resources can be saved and effectively utilized. In addition to being directly affixed, it can also be made into honeycomb panels, composite panels, etc. If a building originally uses 30,000 square meters of natural stone, the weight of the ultra-thin stone will be reduced by at least 1800 tons, and the unit construction cost will be reduced by 100. Above yuan; and through the use of ultra-thin panels in foreign buildings, ultra-thin natural stone can withstand the test of various harsh environments such as earthquakes, thermal expansion and contraction.

Second, the use of thin, ultra-thin stone

1. Thin and ultra-thin stone materials are widely used because of their “thinness”. They can be glued to the ground, floor, ceiling and interior and exterior walls. Instead of dry hanging, ideal decorative materials for office, home and entertainment places. .

2, thin and ultra-thin stone expands its scope of use because of its "light", can be widely used in high-rise floor covering, reducing the structural weight of the floor.

Product advantages:

1. 100% fresh aluminum alloy 6063-T5, iron containing is less than 2% , sturdy and durable, full thickness 3.0mm.

 

2. 3 layer PVDF color coating, thickness more than 80 microns, excellent weather resistance, never fade,More upscale appearance.


3. 100% fresh virgin Bayer Polycarbonate Sheet, 30-50 micron anti-UV coating, can withstand 75% ultraviolet light, impact strength is 300 times that of ordinary glass, 10 years warranty.

 

4. The motor adopts the domestic leading brand and is guaranteed for 10 years.


5. Rugged and novel internal design, 3.0mm thick aluminum alloy profile, 4-10mm high strength impact resistant endurance board, can withstand snow loads of 30 to 45 cm.

 

6. High anti-aluminum structure provides maximum safety even in strong winds (strongest 12 winds) (34m / s strong wind).

Novel structure and easy installation


7. Packaging, protecting the product during shipping and making it easier to install.

Spa Dome Orlando

FOSHAN KASO BUILDING MATERIAL CO.,LTD , https://www.kasocover.com

Posted on