As a kind of wall decoration building materials especially loved by users, it has become an indispensable part of the living room decoration. I believe we all know that there are two ways to use latex paint, namely spraying and brushing. Both of these processes are ye have been carried out after the completion of treatment putty, but differ in the construction process, the paint is a good brush or spray it good? The following Xiaobian gives you a brief introduction of the advantages and disadvantages of these two construction methods, and hopes to provide some help for your home decoration.
Latex paint is good or good spray
1, from the operating point of view, brushing the craft is relatively simple, just use a brush or roller dip some products, you can paint on the wall, and spray, the construction will be more complex, mainly through The booster pump pressurizes the latex paint to obtain a high pressure, and then the pressure is released by a special nozzle to disperse and atomize it and coat it on the wall at a high speed.
2. Although the advantage of brushing is that the process is simple, the wall has texture and it is easy to maintain. However, the wall surface brushed out by this operation method is not smooth and the effect shown by the two is quite different, of course, if a lot of paint is applied. Adding water will also make you feel dizzy when you enter the house.
3, if the method of spraying is used, generally there will not be the above-mentioned situation, the operation efficiency is high, which is about 10 times that of the brush. In addition, the wall surface created by this type of method is very smooth, there is no brush mark, and the coating is Longer life.
4, from the current form, most users will use the spraying method, so not only has a better construction effect, but also can make the wall life becomes longer, in fact, no matter which method is used to carry out the construction, Before the operation, the surface of the wall should be polished smooth and flat.
Latex paint wall construction considerations
1. For some old walls that need to be repainted, if the lacquer layer is cracked or detached, the old lacquer layer should be scraped off. After it is cleaned, it is reground to make the wall flat. , Wait for the wall to dry before painting.
2. If there are other paint projects in the house that need to be painted, paint latex paint after all projects are completed, mainly because the paint emits harmful substances such as toluene, which will make the paint yellow, because if you do not pay attention to this It is very likely to cause huge losses.
3, in order to create a good stucco effect, we must pay attention to the starting temperature, especially when dressed in the winter, we must ensure that the temperature of the construction environment of latex paint not less than 5 degrees, if the temperature is too low, it is difficult to play a role , but also affect the filming effect.
Summary: The above is about good paint brush or spray a good explanation of the content, I believe most people are good brush to paint a good spray or already have a better understanding, of course, if you have better suggestions and ideas, Please feel free to consult Xiao Bian.
Latex paint
Refers to Outdoor Lighting other than road lighting. Outdoor lighting is required to meet outdoor visual work needs and achieve decorative effects.
Outdoor Lighting
Led High Bay ,Led Floodlight,Led Street Light,Outdoor Lighting
Guangzhou ZG Scaffolding.co.Ltd , https://www.zgscaffolding.com