Filter cotton Recommended replacement time Remarks
Top cotton 400-450 hours
Air inlet filter 60-80 hours
Bottom mesh filter cotton 80-100 hours
Exhaust filter cotton 80-100 hours
This is a multi-practice data. As the usage environment and the type of paint change, the parameters during use will also change. Please replace it with the actual situation.
Precautions for use:
No flammable or explosive materials should be stored in the baking room.
After each operation, the barn must be cleaned, and any part of the cover used to cover the unsprayed objects must be cleaned up.
The ground net and its floor are recommended to be cleaned once a week with a vacuum cleaner.
The supply voltage must not be lower or higher than 10% of the specified voltage.
If the burner does not ignite once, please wait for 3 minutes, then press the red button on the control box. If it does not catch fire for four consecutive times, please clear the oil in the heat exchanger and find out the fault before starting the burner. .
The diesel brand used must be 5 °C higher than the local minimum nighttime temperature. Do not use diesel oil with return oil, water or other impurities.
The car paint booth http:// is only allowed to be used in an environment without explosion hazard and open flame. It is strictly forbidden to smoke in the room.
The manufacturer is not responsible for any changes to the equipment configuration without the manufacturer's approval.
The manufacturer is not responsible for all responsibilities for the removal or demolition of protective or safety devices.
When mosquitoes are present in the bakehouse, mosquito repellents should be used to remove the mosquitoes in order to carry out the spraying operation.
When the equipment is working, it must be monitored. After the work is completed, all switches must be reset to the stop position.
This equipment must be operated by a person who is familiar with the operating instructions of the equipment.
We focus on high purity alumina, zirconia and silicon nitride as the material for mechanical seal ceramics. Due to this component is able to offer superior anti-wear, anti-chemical, resistant high tempreture and pressure , and low friction with self-lubrication characteristics. In consideration of these features, Ceramic mechanical sealing components have a better sealing performance and a longer service life span than metal and plastic ones. It is likely to be a trendency using ceramic mechanical seals replace metal ones.
The mechanical seal ceramics we manufactured mainly include seal faces, seal ring, seal disc and ball valve and so on.
It's widely used various of oil pump, water pump, valve devices and other many different seal devices.
Ceramic Seals,Ceramic Seal Faces,Ceramic Seal Ring,Ceramic Pump Seal
Jinghui Industry Ltd. , http://www.ceramictek.com