Due to the special environmental conditions of the bathroom and bathroom, the water is gas, moisture, mold and dirt, and often contact with detergents and other daily chemicals, so the bathroom stone is very susceptible to pollution, once the maintenance is not good, the surface of the stone will Corroded, become dull, and even appear colored lines.
Therefore, in daily life, be careful not to use shampoos containing dyes, do not use soaps and shampoos containing artificial colors, and do not use acidic or alkaline detergents. Neutral cleaning agents should be used to clean the surface. Make the surface of the stone dry, wipe it off when there is a contaminant on the surface of the stone, and so on.
Maintenance points of bathroom stone
1. Confirm the hardness of the water.
Use soft water as much as possible during daily life and stone maintenance. Because hard water leaves deposits on the surface of the stone, these deposits darken the surface and chemically react with the stone surface. Because the removal of these deposits requires the use of chemical products. Chemicals also damage the stone while removing the stain.
2. Use permeable stone protectant to protect the stone.
In order to reduce the water absorption rate of the stone and reduce the degree of adhesion between the deposit and the stone, the use of a permeable stone protectant is the best method. Before installing the stone, it is best to carry out the following two kinds of protection: First, the internal protection of the stone, that is, the use of a permeable silicone solvent for protection to minimize the water absorption rate; second, the surface protection of the stone, ie Fluorine-containing polymers with water and oil repellency are used to reduce damage to stone by acidic or alkaline stains such as mineral deposits and soapy water.
3. The bathroom surface should be cleaned in time after each use.
At the same time, when cleaning, it should be cleaned according to the specific conditions to carry out targeted cleaning, that is, according to the variety of stone, the use environment, the main source of pollution to choose the appropriate cleaning agent and cleaning method. If you do not understand the specific situation and blindly choose the cleaning agent, it will cause different consequences such as stone damage, deterioration, yellowing and blackening.
4. Regularly polish the marble surface
After a period of use, if the local color of the marble surface becomes dark, even the damage is serious and the surface gloss disappears. This can actually be done with a liquid polishing mix (polishing powder and polishing solution) for self-cleaning (DIY) polishing. Or choose a professional marble maintenance company to help maintain and polish. It is best to carry out after a period of use, usually once a year, do not wait until the stone damage is serious before polishing and maintenance.
A salt lick is a deposit of mineral salts used by animals to supplement their nutrition, ensuring that they get enough minerals in their diets. A wide assortment of animals, primarily herbivores, use salt licks to get essential nutrients like calcium, magnesium, sodium, and zinc. When a saltlick appears, animals may travel to reach it, so the salt lick becomes a sort of rally point where lots of wildlife can be observed.
Farmers have historically provided salt licks for their cattle, horses, and other herbivores to encourage healthy Growth and development. Typically a salt lick in the form of a block is used in these circumstances, and the block may be mounted on a platform so that domesticated animals do not consume dirt from the ground along with the necessary salt. Salt blocks for farm animals can also be treated with medications, which may be convenient when someone needs to medicate shy animals, or a large group of animals.
Salt Lick Block,Animal Feed Salt,Livestock Salt Lick Blocks,Animal Licking Salt Block
Weifang Xinchang Chemical Co.,Ltd , http://www.xinchangchem.com