Mei'an Chunmei: What are the precautions for solid wood furniture maintenance essential oils?

If the home uses expensive high-end homes, but does not realize the importance of maintaining the home, and then affects the service life in the daily use, it will be extremely regrettable. Undoubtedly, the service life of Mei'an Chunmei Furniture will be affected by environmental changes. The storage temperature of Mei'an pure beauty furniture is preferably between 15-24 degrees Celsius and between 35%-40% relative humidity, which will prolong its service life.

At the same time, Mei'an Chunmei furniture should be placed away from the heat source or air conditioning tuyere. At the same time, the use of humidifiers, fireplaces, and heaters will also affect the changes in the beauty of Meimei Furniture, which may cause damage to the exposed parts of the furniture. When it comes to the beauty of the United States, it is essential to have a living room sofa. The leather sofa is the new darling of modern consumers. It is both atmospheric and beautiful. Of course, maintenance is especially important. How to maintain the leather sofa is the most important thing is to maintain regular maintenance. It is best to wash the water with a clean towel once a week, wring it out, and then wipe it on the sofa. When wiping the sofa, do not rub it vigorously to avoid damage to the epidermis. After wiping with a towel, use a proper amount of leather care agent to wipe it evenly again for good maintenance!
Netizen said:
To see what kind of solid wood furniture, if it is mahogany furniture, it is best to use traditional walnut oil or chicken oil to wipe. If it is other non-rare wood, it is recommended to wipe it with ordinary essential oils on the market, even the furniture wood Bi Lizhu can be. Wipe it off with a clean, soft cloth. Remember to wipe off the surface dust with a soft dry cloth before wiping with oil!
This topic is too big. Pine furniture is completely different from mahogany furniture.
For ordinary families, there is very little to say: the surface of the furniture is paint, and the paint is well maintained, that is. In other words, wipe the point of maintenance oil, just fine.

The lower the purity, the so-called essential oil is the same as the juice we drink, leaves, seeds, and finally the true essential oil content and the moisture content is almost the best maintenance method is waxing, is a plant-derived flower, tree Skin, frozen compression and pressing. High-purity essential oils are water-resistant, and may have higher levels of impurities and moisture, but the essential oils will still contain a certain proportion of water (about 5%-7%).

Source: GO Jiaju Furniture Network

The definition and classification of engineering plastics is a specific name.Engineering plastics broadly refers to plastic which has high performance and may replace metal materials.The narrow sense refers to the strength and heat resistance of plastic (PE, PP, PVC, ABS, etc.), which can be used as a structural material for industrial use and has the functional structure of high performance plastic

Plastic can be divided into two main categories: thermoplastic (after heating and melting) and thermosetting (after heating and turning into a three-dimensional structure).Engineering plastics can also be divided into special engineering plastics and standardengineering plastics.

The so-called engineering plastics plastics often refer to thermoplastic polyamide (PA plastics).Polyoxymethylene (POM plastics), polycarbonate (PC plastics) and so on , and special engineering plastics often refers to other than the above five kinds of more excellent performance engineering plastics.According to the using temperature points, generally use temperature at 150 â„ƒ.The following is a standard engineering plastics (generally is 100 â„ƒ--150 â„ƒ), more than 150 â„ƒ for special engineering plastics, special engineering plastics is divided into 150 --250 â„ƒ class (including the standardengineering plastic compounds) and above 250 â„ƒ.The higher the temperature, the higher the price.

Characteristics of engineering plastics(compared with metal materials):

1.Advantages:

(a) small proportion: 1.0 -- 2.0, about one sixth of iron, reducing the weight effect;

(b) good processing and high production efficiency;

(d) the friction coefficient

(e) can be colored freely;

(f) easy to compound with Glass Fiber and various filler;

(g) excellent electrical insulation;

(h) excellent heat insulation, with thermal conductivity of about 1% of iron and less than two thousandths of copper;

(I) reduce costs, save resources and energy.

2.Disadvantages:

(a) low heat resistance and low softening point;

(b) the mechanical strength is low and the tensile strength is generally about one-tenth of the steel;

(d) poor durability. Prolonged exposure to gravity is susceptible to fatigue, and prolonged exposure to ultraviolet radiation is associated with lower performance.

3. Application of engineering plastics

(a)One is the functional components of strength, drug resistance, abrasion resistance and other requirements.The other is mechanical parts with shrinkage, dimension accuracy and appearance.Generally speaking: the former is crystalline engineering plastics, the latter is non-crystalline engineering plastics.The practical application often requires the performance of both.Engineering plastics with glass fiber (GF) or carbon fiber (CF) are more suitable for such requirements.

(b). More than half of the applications in engineering plastics are automotive and electronic, while the main use of standard plastics is extrusion molding (51%) and non-industrial products (21%).

4. Production

(a)POM Plastic Sheet/Acetal Plastic Sheet/Delrin Plastic Sheet/Polyoxyemethylene Plastic Sheet

(b).POM Plastic Rod/ Acetal Plastic Rod /Delrin Plastic Rod/Polyoxyemethylene Plastic Rod

(c)1.antistatic POM Plastic Sheet /antistatic Acetal Plastic Sheet/antistatic Delrin Plastic Sheet/antistatic Polyoxyemethylene Plastic Sheet

(d).antistatic POM Plastic Rod/antistatic Acetal Plastic Rod/antistatic Delrin Plastic Rod/antistatic Polyoxyemethylene Plastic Rod

(e)Conductive POM Plastic Sheet/Conductive Acetal Plastic Sheet/Conductive Delrin Plastic Sheet/Conductive Polyoxyemethylene Plastic Sheet

(f)Conductive POM Plastic Rod/Conductive Acetal Plastic Rod/Conductive Delrin Plastic Rod/Conductive Polyoxyemethylene Plastic Rod

(g)POM+PTFE Plastic Sheet /POM+teflon Plastic Sheet/Acetal +PTFE Plastic Sheet/Acetal+Teflon Plastic Sheet/Delrin +PTFE Plastic Sheet/Delrin+ Teflon Plastic Sheet

(h)POM+PTFE Plastic Rod/POM+teflon Plastic Rod/Acetal +PTFE Plastic Rod/Delrin +PTFE Plastic Rod/Delrin+ Teflon Plastic Rod

(j) PA Plastic Sheet / Nylon Plastic Sheet /ESD PA Plastic Sheet/ESD Nylon Plastic Sheet/CON PA Plastic Sheet/CON Nylon Plastic Sheet/PA+GF Plastic Sheet/Nylon+Glass Fiber Plastic Sheet/Fireproof PA Plastic Sheet/Fireproof Nylon Plastic Sheet

(k) Pa Plastic Rod /Nylon Plastic /Rod/ESD PA Plastic Rod/ESD Nylon Plastic Rod/CON PA Plastic /Rod/CON Nylon Plastic Rod/PA+GF Plastic Rod/Nylon+Glass Fiber Plastic Rod/Fireproof PA Plastic Rod/Fireproof Nylon Plastic Rod

(l) PC Plastic Sheet / Esd PC Plastic Sheet /PC+GF Plastic Sheet/PC+Glass Fiber Plastic Sheet/Fireproof PC Plastic Sheet/PC+ Abs Plastic Sheet

(M) PC Plastic Rod

(N) PET Plastic Sheet //Unilate Plastic Sheet/ESD PETPlastic Sheet/ /ESD Unilate Plastic Sheet

(O)UPE Plastic Sheet/UHMW-PE Plastic Sheet/ESD UPE Plastic Sheet/ESD Uhmw- Pe Plastic Sheet /Con UPE Plastic Sheet/CON Uhmw- PE Plastic Sheet

(P) ABS Plastic Sheet / Esd ABS Plastic Sheet /.Fireproof ABS Plastic Sheet/ABS+PC Plastic Sheet

Engineering Plastics (80-160â„ƒ)

Engineering Plastic,Engineering Plastic Plate,Engineering Plastic Material

Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com