The second batch of central environmental protection inspectors has been fully launched

Recently, the second batch of central environmental protection inspectors in 2016 has been fully launched. Seven central environmental protection inspectors will conduct environmental inspections in seven provinces including Beijing, Shanghai, Hubei, Guangdong, Chongqing, Shaanxi and Gansu. At this point, the central environmental protection inspector has covered half of the provinces, and the “environmental imperfections” that have been stationed in this round will focus on environmental protection, inaction and chaos.

What is the progress of environmental inspectors?
- Covered half of the provinces
In July 2015, the 14th meeting of the Central Deep Reform Group reviewed and approved the “Environmental Protection Inspector Program (Trial)” and clearly established the environmental inspection mechanism. The inspector's work will be carried out in the form of the Central Environmental Protection Inspectorate, the provincial party committee and the government and its relevant departments, and will sink to some municipal party committees and government departments.
According to the arrangement, from 2016 onwards, the Central Environmental Protection Inspector Group will use all the inspectors of all provinces, autonomous regions and municipalities in the country for about 2 years.
From December 31, 2015 to February 4, 2016, the central environmental protection inspector pilot was launched in Hebei. As of April 8, 2016, in the environmental problems assigned by the Central Environmental Protection Inspectorate, the province has shut down and banned 200 environmentally illegal enterprises, imposed 125 cases, imposed administrative detentions, and administrative interviews of 65 people. Criticized 60 people, responsible for 366 people.
In July 2016, the first batch of eight central environmental protection inspectors entered China in Inner Mongolia, Heilongjiang, Jiangsu, Jiangxi, Henan, Guangxi, Yunnan, and Ningxia, and carried out a one-month environmental supervision work. As of November 23, the feedback from the first batch of central environmental inspectors was released, and the total number of people in eight provinces accounted for more than 3,400.
According to the website of the Ministry of Environmental Protection, as of November 30, a new batch of 7 central environmental protection inspectors have all implemented inspectors. In addition to the eight provinces involved in the first batch of environmental inspectors this year, the central environmental inspectors have covered half of the provinces.

What issues will the inspector team focus on?
——The situation of environmental protection inaction and chaos in the relevant departments
At the work mobilization meeting, the inspectors of this round emphasized that the focus of the inspection team's work is to inspect the provincial (city) committee and the provincial (city) government to implement the national environmental protection decision-making, solve outstanding environmental problems, and implement The responsibility of environmental protection subjects promotes the construction of ecological civilization and environmental protection, and promotes green development.
In addition, the focus will be on the prominent environmental issues and their handling of the central government's high level of concern, strong public response, and poor social impact; key areas will be examined for the deterioration and trend of regional watersheds and remediation; key inspectors of local party committees and governments and their relevant departments The situation of environmental protection inaction and chaos; focus on understanding the local implementation of environmental protection party and government with the same responsibility and responsibility, strict accountability and other circumstances.
In form, the inspectors mainly take the means of listening to reports, reading materials, individual conversations, visiting enquiries, accepting reports, spot checks, and inspecting inspectors. According to the arrangement, the second batch of environmental protection inspectors will be stationed for about one month. It is expected that the stationing work will be completed by the end of this year.
In the previous batch of environmental inspectors, Inner Mongolia, Heilongjiang, Jiangsu and other eight places have been identified with different levels of environmental protection.
For example, Jiangxi was previously instructed by the inspector group to say that “environmental inaction and chaos are prominent issues”. The Leping Municipal Government violated the Regulations on the Administration of the Collection and Use of Sewage Charges. From 2012 to 2014, it used several financial funds to pay the sewage charges for 36 enterprises.
Ningxia has also been accused of “responsible for the environmental problems such as the pollution of the Tengger Desert and the ecological destruction of the Helan Mountain National Nature Reserve. It only conducts accountability to the grassroots supervisors and does not trace responsibility from the decision-making and other aspects.”
Henan also has problems with environmental protection and slowness. The province is accounted for more than 1,200 people.

Is there a problem with the province in this round?
- Beijing's finalist air quality in October this year, "the worst ten cities"
It is worth noting that among the seven provinces where the second batch of central environmental protection inspection teams are stationed, Beijing, the capital of the smog-stricken invasion, is also included.
In November this year, the Ministry of Environmental Protection released the air quality status of the national and Beijing-Tianjin-Hebei, Yangtze River Delta, Pearl River Delta regions and municipalities directly under the Central Government, provincial capital cities, and planned cities in October-October and October 2016.
The data shows that in October, the proportion of fine days in Beijing was 54.8%, down 19.4% year-on-year, and the concentration of PM2.5 was 84 μg/m3, up 13.5% year-on-year; O3 did not exceed the standard, down 6.5 percentage points year-on-year. In addition, in October this year, the last 10 cities with relatively poor air quality rankings in 74 cities included Beijing.
Not long ago, the Ministry of Environmental Protection carried out special supervision on the emergency response to heavy pollution in Beijing. The North China Environmental Protection Supervision Center dispatched an inspection team to conduct special inspections on the emergency response of heavily polluted weather in Haidian, Fengtai, Mentougou, Tongzhou, Fangshan, Daxing (including Yizhuang Development Zone). The results show that the emergency response plan for the urban-rural integration and suburbs in Beijing has not been implemented.
Also facing the air pollution problem is the Shaanxi province where the current round is stationed. According to data released by the Ministry of Environmental Protection, in the first 10 cities of the 74 cities with relatively poor air quality rankings in the first ten months of this year, Xi'an, the capital of Shaanxi Province, was on the list.
For this round of inspectors, the seven top leaders of the party and government who were stationed in the province attended the mobilization meeting and actively expressed their willingness to cooperate with the inspectors.
Guo Jinlong, member of the Political Bureau of the Central Committee and secretary of the Beijing Municipal Party Committee, requested at the mobilization meeting that in response to the environmental protection supervision work, it is necessary to carefully investigate the problems, analyze the causes, and do a good job in reporting, conditional guarantees, and rectification of problems. The problems reflected by the people's letters and visits transferred by the inspectorate team must be investigated and dealt with seriously. Once verified and seriously pursued, the inspection work will be carried out smoothly.
Shaanxi Provincial Party Committee Secretary Qin Qinyi also said that it is necessary to use the rare opportunity of central environmental protection inspectors, deepen the rectification of outstanding environmental problems, further consolidate environmental protection responsibilities, and strengthen the "party and government responsibility" of party committees and governments. We will implement the methods for investigating the responsibility of the party and government leading cadres for ecological environmental damage, promote the establishment of new development concepts at all levels, accelerate the construction of a resource-saving and environment-friendly society, and provide a solid environmental guarantee for the sustainable development and catch-up of Shaanxi.

   DAYUE standard date stamp (imported) with unique performance of internal bead indexing positioning, suitable for tightness, precise integration can not be changed core, there is obvious rotation of the card position when rotating; economical and practical, can be engraved text logo according to different customer requirements, such as : Japanese chapter code, month chapter code, year-month combination code, shift code, letter chapter code, etc.
 
   1. Date stamp is a standard insert of various molds and patterns left on the surface of plastic products to record the production date, brand name, trademark, service life, materials, etc. of plastic parts. It is convenient for product quality management, and is an important way to identify the content of the product's future maintenance and years.
   2. The integral date chapter is for steel ball positioning. Its positioning structure is divided into 12, 10, and 31 positions (∮8, 10, 12, 16, 20 exclusive), and other tooth positions need special customization.
3. Installation: Use a soft metal pad such as a copper tube to act on the outer frame of the date stamp and gently tap it into the mounting hole of the mold.
   Other parts consist of Common Mold Parts are divided into ejectors and sleeves, Date & Recycle Mark Inserts, Pins with Gas Vent, Core Pins , Ejector Pins, Large Mold & Die Casting Components, Mold Opening Controllers, Leader & Ejector Space Components, Sprue Bushings, Gates & Other Components.

Mold standard parts

Plastic mold partsv,recycling mark inserts,Mold Opening Controllers,Plastic Mold Accessories,Plastic Mold date

Dayue Precision Technology (Dongguan) Co., Ltd. , https://www.dayuechn.com