Learn to self-test home renovation

Water pipes: 1. The pipe is placed at the nearest distance and at least the interface is the standard. The pipe body should be straight and tidy, and should be bent and folded as little as possible; 2. All indoor use brass pipes, hot water with plastic copper pipes, and water pipes with PVC pipes. Waterproof tape is used for the interface; 3. The level and four positions are required to install the basin and the seat surface; 4. The cloth tools must be used to install the faucet or cover, and the faucet and accessories must not be damaged. The hammer must not be used to strike directly; 5 Kitchens and toilets must have a floor drain; 6. Water must be tested after installation.

Floor: 1. Smooth the floor to be smooth, no pits and scratches, no grinding in the corners; 2. At least 3 times floor wax; 3. When laying, leave millimeters on all sides, and then use the foot line. Edge cover; 4. Wood flooring should use plywood as the bottom, the bottom of the board should be placed with oil-proof paper or plastic film, and four sides reserved for vacancies.

Tiles: 1. The brick surface should be flat, the angle should be accurate, the interface should be on the line; 2. The tiles should be soaked for half a day before use; 3. The toilet ground should have an appropriate slope, not water; 4. After the tile interface is cleaned by white cement Wipe the white cement with rattan silk, do not leave cement stains on the brick surface; 5. Cover the brick surface with cardboard, etc. after the tiles are laid, and walk on the brick surface at least for a few hours.

Posted on