Fine decoration refers to the grades and specifications of the decoration, general fine decoration of the house, the floor is the floor, the walls and the roof have plaster sides, the kitchen is a whole cabinet, the bathroom has a tile, just move into furniture and sofas and other soft equipment, you can Check-in package. Next, Xiaobian introduced the construction standards for finely-decorated houses and the acceptance criteria for finely-decorated houses.
Fine decoration house construction standards
First, the floor decoration
(1) Floor stone
1) The stone blocks should be stacked in the room after they enter the market, stacked side by side, and wooden blocks should be added underneath. And detailed check whether the variety, specification, quantity, quality, etc. meet the design requirements, there are cracks, missing corners of the angle shall not be used. Need to cut the drilled plate and process it before installation. Stone processing is arranged outside the yard. Indoor plastering, hydropower equipment pipelines have been completed. There is a +50cm horizontal line on the wall around the room. Before construction, a large construction plan should be released to lay stone ground.
2) After the stone enters the site, it is necessary to shovel the grid cloth behind the stone, and then use the stone protection agent to carry out six-sided protection treatment on the stone, and dry it before paving.
(2) Composite wood floor
Grassroots cleaning → elastic line → laying mats → gasket laying → laying moisture-proof base board → acceptance, reinforcement → laying mats → floor approaching stacking → selection board trials → laying wooden flooring → finished product protection. The laying direction of the bar-shaped wooden floor should consider the convenience of nailing, firm fixing, and the use of aesthetic requirements. For corridors, aisles, etc., they should be laid in the direction of walking; while in the interior rooms, it is advised to follow the light. For most of the rooms, follow the light, which is consistent with the direction of walking.
Second, wall engineering
(1) Wet stone and grouting construction
(2) Wall hanging stone
(3) Mosaic finishes
(4) Wood surface oil paint finish
(5) Concrete and plaster brushes Latex paint
(6) Glass Wall
Refined housing acceptance criteria
one. ground
1. Regardless of smooth or backlit light, the visual appearance of the plate floor or the entire floor surface should be smooth, smooth, free from undulations, non-polluting, and scratch-free, and the color should be uniform.
2. The difference in height between adjacent stairs should not exceed 5mm; Stepping should be done in non-slip treatment; stone stepping board is preferably 40 thick or double-edged. The side of the tread plate should be polished, with clear boundaries of latex paint, no cross-contamination.
3, the thickness of the baseboard should be consistent with the wall, the error is not more than 1MM; the error of the height of the same wall baseboard shall not exceed 2MM; the upper mouth of the stone baseboard shall be edging and polishing.
4, the ground, such as stone, tile and other materials, the best joints with the wall to follow (or determined by the design).
5, the surface walking without "creak" sound; wood joints should be no height difference, the wood should reach into the kick inside, leave 10MM gap from the wall.
Second, doors and windows
1, double door: the gap of the door leaf does not exceed 2MM, the height difference of the two doors does not exceed 0.5MM
2. Single-opening door: The gap between the door leaf and the door frame shall not exceed 1.5mm, the gap between the door leaf and the door frame shall not exceed 1.5mm, the gap between the door leaf and the ground shall be controlled at about 5mm, and the plane height difference between the door leaf and the frame shall not exceed 0.5MM;
3. The hinges and other hardware on the door leaf should be firmly installed without scratches or pollution. The hinges should be installed and grooved accurately. There should be no height difference between the hinge and the side edge joints; the hinge screws should be kept horizontally and vertically.
4. The edges of the door leaf are closed with solid wood strips, and the edge strips and door panels should be firmly fixed, flat and without shrinkage.
Third, partition wall
1. The boundary between the partition wall and the ground and suspended ceiling should be clearly defined, the gap is less than 2mm, and there is no pollutant;
2, plasterboard, veneer, partition walls do not allow cracks, defects, scratches and other conditions. The joints of the veneer panels should be uniform and straight, and the partition walls should use environmentally soundproof materials.
3, glass partitions must use safety glass; side-by-side glass joints should be left the same width, and the width of 4-6mm is appropriate, the glass edge appropriate chamfering. The seams are horizontal and vertical, and the depth is consistent with no bubbles. If there are stripes on the glass, they should follow each other.
4. With arc walls, the wall arc must be rounded, smooth, and no height difference at the joints.
Editor's summary: The construction standards for finely-decorated houses and the acceptance standards for finely-furnished houses are introduced here, and we hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
The new house acceptance notice fine decoration budget Japanese style fine decoration design three rooms American fine decoration design loft living room fine decoration model room
Shutter Sound Barrier are acoustic fences designed to act as a sound barrier and screen vehicle noise from roads,highways, railways, residential areas, construction sites.
Noise barriers help in absorbing the noise generating from vehicles on a heavy vehicular traffic area. Thus noise barriers have proven to be effective in absorbing noise and providing an excellent solution to subsidize noise for highway, residential areas near the busy roads, and also for schools, hospitals.
Materials: aluminum sheet, galvanized steel sheet .etc
Finishing:high-pressure electrostatic spray coating
Standard Height:2,000mm, 2,500mm, 3,000mm and space between poles 1,000mm, 2,000mm and 2,500mm. it is available upon customer request.
Features:
1. Absorptive and insulation type.
2. Minimum noise leakage due to special snap lock design.
3. High intensity and stability: special-made steel structure and aluminum material.
4. Safety: PC sun panel or double layers with pastern apply on the transparent insulation part to avoid hurting vehicle and others on case of incident.
5. Beautiful appearance, delicate workmanship, easy installation, low cost and long service life.
6. It has wide applications on express way, subway and industry noise control.
7. The light transmission of the sheet is quite good.
8. The weather resistant treatment of anti UV on the surface of the sheet prevents the resin from turning yellow by causing Ultraviolet ray.
9. The UV agent has chemical bond to change ultraviolet ray into visible light ,which has a stable effect on the photsynthesis of plants.
10. Temperature property: in the temperature from -40C to 120C, the product will not deform.
11. It is light in weight, easy to handle and drill,convenient for construction and procession .When cutting for installation ,it is not easy to be broken.
Applications:
1. Highway noise walls
2. Railway noise walls
3. Airport noise barriers
4. Security fence
5. Obscuration screens
6. Bridge and roof mounted noise barriers
7. Industrial noise control panels
8.Construction materials
9.School enclosures
Louver Upright Sound Barrier,Noise Barrier,Noise Barriers For Small Equipment
Anping shengsen metal wire mesh products co,. ltd , https://www.apshengsen.com