If leakage occurs during the renovation, not only does it cause unnecessary economic losses to many families, but it may also destroy the neighboring relationship between the original family and the imperial family. Therefore, before the renovation of a new house, it is necessary to establish a good bathroom waterproofing construction plan with the decoration company. Standard waterproofing is best. The next small series for everyone to introduce bathroom waterproofing practices so that your bathroom will no longer leak.
1, bathroom waterproof floor tiles
When laying waterproof tiles, try to use the cement mortar to level the floor as early as possible. The waterproof treatment is performed so that unevenness of coating can be avoided and leakage of the waterproof paint can occur. Before doing waterproofing, the ground must also be cleaned.
2, bathroom waterproof height
Be sure to do a good job of waterproofing the walls before laying the wall tiles. We all know that in the general waterproofing treatment, the walls need to be waterproofed by 30. If it is a non-load-bearing light wall, it needs to be done on the whole wall. Waterproof, at least 60cm high.
3, bathroom waterproof wall groove
The inner water pipe groove should also be waterproof. When the pipeline, floor drain, etc. crosses the floor during construction, the waterproof layer around the hole must be carefully constructed. Buried water pipes in the wall, so that a reasonable layout, the laying of water pipes will be greater than the diameter of the groove, smooth plaster groove, and then brush the groove waterproof coating.
4, bathroom waterproof coating
Waterproof coatings should be qualified products that comply with national and local regulations. For the smearing work of the bathroom waterproof coating, the seams on the wall and the ground are very critical, and are also more prone to problems. It is necessary to apply the waterproof coating to the corners of the wall and the floor.