Effect of Chlorine Dioxide and **** on Germicide Killing of Mineral Water

As natural mineral water becomes the main source of daily drinking water, the safety of mineral water has received more and more attention. The new National Standard for Drinking Natural Mineral Water[1] was formally implemented on October 1, 2009. Among them, the microbial indicators increased the incidence of Pseudomonas aeruginosa, Streptococcus faecalis, and Clostridium perfringens. The detection of bacteria, while eliminating the total number of bacteria, aims at emphasizing the microbiological safety of products and is in line with international standards.

Chlorine dioxide has a strong oxidation effect, and it does not produce an alternative reaction of chlorine, so it will not produce carcinogenic, distorted organic chlorinated products. It is classified by the United Nations Health Organization (WHO) as an A1 safety disinfectant [2]. ]. **** is a widely used acidic oxidizing disinfectant, which can be used for general object surface and food processing machinery pipe, tools, packaging, tableware and environmental disinfection, and has been widely used in many fields[ 3]. Therefore, mineral water manufacturers often use chlorine dioxide and **** disinfectant for the disinfection of recycling bins.

Studies have shown that [4 ~ 5], in our country natural mineral water source, the positive rate of Pseudomonas aeruginosa is about 20% to 25%; and Streptococcus faecalis and Clostridium perfringens are also indicators of water pollution . Therefore, in the production process, due to some reasons such as cross-contamination, recycling bins may also carry these pathogenic bacteria. The purpose of this paper is to study the killing effect of chlorine dioxide and **** on these three types of mineral water hygiene indicator bacteria, so as to provide reference for the disinfection concentration and time of two kinds of disinfectants in actual production, and prevent the incomplete disinfection. It caused a health accident.

1 Materials and Methods

1.1 Disinfectant preparation

The stability of chlorine dioxide and **** disinfectant used in the test was provided by Guangdong Kaikai Microbial Technology Co., Ltd. Stabilized chlorine dioxide is a binary preparation. After activation for 10 minutes by disinfectant:activator=10:1 (v/v), the effective content of chlorine dioxide is determined by the five-step iodometric method [6]. Diluted to the required concentration for use. **** disinfectant is a one-component preparation, according to the indirect iodometric method [7] (GB/T 19104-2006) to determine the effective content of ****, and then diluted to the required concentration for use.

1.2 bacterial suspension preparation

The test organisms were Pseudomonas aeruginosa (ATCC 15442), Streptococcus faecalis (ATCC 25912) and Clostridium perfringens (ATCC 13124). Pseudomonas aeruginosa and Streptococcus faecalis were excised from a fresh culture (18-24 h) on a nutrient agar medium and washed with phosphate buffered saline (PBS) to prepare the test bacteria suspension. Clostridium perfringens was directly taken from a fresh culture (18-24 h) in a broth broth and diluted with PBS to prepare a test concentration suspension.

1.3 Neutralizing agent identification test

The test bacteria were Pseudomonas aeruginosa, Streptococcus faecalis, and Clostridium perfringens. Six groups were set up for the test, and the tests were conducted according to the neutralizer identification test procedures specified in the Disinfection Technical Specifications (2002 edition)[8]. The result is judged.

1.4 Suspension Quantitative Bactericidal Test

The test was carried out in a water bath at 20 °C. According to the Quantitative Bactericidal Test for Suspension in "Disinfection Technical Specification" (2002 edition), add 0.5 mL of bacterial suspension to a large sterilized test tube, add 0.5 mL of organic interference substance (3% bovine serum albumin), and mix. . Add 4.0 mL of the corresponding concentration of disinfectant and apply it for a predetermined time. Take the mixture of 0.5 mL to 4.5 mL of the neutralizer, mix well, and neutralize for 10 min. Gradient dilution, take 1.0 mL inoculated sterile dishes, pour agar medium and mix. Among them, Pseudomonas aeruginosa and Streptococcus faecalis use tryptone soy agar (TSA) medium, and Clostridium perfringens uses sulfite polymyxin sulfadiazine agar base (SPS basis) medium. After the medium was coagulated, Pseudomonas aeruginosa and Streptococcus faecalis were cultured at 37 °C for 48 h. Clostridium perfringens was anaerobically cultured at 37 °C for 48 h. Results were observed. The number of plate colonies was counted and the kill rate was calculated. The test was repeated 3 times.

2 results

2.1 Neutralizing agent identification test results

Neutralizing agent identification test represented by three test strains showed that neutralization agent was composed of PBS solution containing 2 g/L*sodium sodium+3 g/L lecithin+10 g/L Tween 80. The residual effect of chlorine dioxide and **** disinfectant can be effectively neutralized. Neutralizer and neutralizing product have no effect on the test bacteria and the culture medium.

2.2 Suspension quantitative sterilization test results

Different concentrations of chlorine dioxide and **** have different killing effects on Pseudomonas aeruginosa, Streptococcus faecalis, and Clostridium perfringens. Experiments have shown that chlorine dioxide is resistant to Pseudomonas aeruginosa, Streptococcus faecalis and The conditions for C. perfringens killing rate of 100% were 50 mg/L for 1 min (the results are not listed in Table 1), 35 mg/L, 3 min and 35 mg/L for 3 min. In contrast, 100 mg/L of disinfectant 100 mg/L for 3 min or 200 mg/L for 1 min could kill 100% of the three pathogenic bacteria.

3 Discussion

Chlorine dioxide and **** are oxidizing disinfectants. They have a broad-spectrum, high-efficiency and fast killing characteristics of various microorganisms. From the test results, these two types of pathogenic bacteria added to the health indicators of mineral water have a good bactericidal effect, and can effectively kill these microorganisms at a lower concentration and in a shorter time. However, it is generally believed that the bactericidal effect of chlorine dioxide is significantly affected by organic matter, but this may be related to the type and concentration of organic matter [3]. Similarly, the bactericidal effect of **** is more or less affected by organic matter. Therefore, in the actual use process, in the production process of barreled drinking water, an effective cleaning must be performed before the recycling barrel is sterilized, so as to reduce the content of organic matter, thereby ensuring the disinfection effect.

Pseudomonas aeruginosa can be detected in many sources of water, and it is highly susceptible to drug resistance. Its mechanism of drug resistance is complex and has become a model strain for the study of microbial resistance. From the test results, Pseudomonas aeruginosa has stronger resistance to chlorine dioxide and **** than Streptococcus faecalis and Clostridium perfringens. Therefore, in the production process, the detection of Pseudomonas aeruginosa should be strengthened.

Clostridium perfringens is a food-borne pathogen that produces spores, and its spores live longer in the water than in the larger intestinal flora and are resistant to disinfectants. Due to the long survival time of C. perfringens spores, it is most suitable as an indicator of intermittent pollution and long-term contamination. Therefore, it is more practical to study the killing effect of chlorine dioxide disinfectant on spores of Clostridium perfringens.


references

[1] Drinking natural mineral water. The national standard of the People's Republic of China GB 8537-2008.

[2] Bailian. Chlorine dioxide preparation and application. Science and Technology Information, 2006, 5: 56~57.

[3] Editor-in-Chief of Xue Guangbo. Modern disinfection. Beijing. People's Military Medical Press, 2002, 359, 384.

[4] Deng Meiqing, Zhang Jumei, Guo Weipeng, et al. Study on the contamination status of Pseudomonas aeruginosa in mineral water. Chinese Journal of Health Inspection, 2009, 11: 2672~2673.

[5] Ma Qunfei, Lin Jian, Chen Meilan, et al. Drinking natural mineral water source Pseudomonas aeruginosa pollution investigation. China Water Supply Hygiene, 2000, 8(4): 36~38.

[6] Chlorine dioxide disinfectant sanitation standard. The national standard of the People's Republic of China GB26366-2010.

[7] **** solution. National Standard of the People's Republic of China GB/T 19104-2008.

[8] Department of Health Law and Supervision, Ministry of Health. Disinfection technical specifications. Beijing. Ministry of Health of the People's Republic of China, 2002.