The more fragrant latex paint, the more vigilant

In home decoration, the cost of paint coating only accounts for 5% of the total budget, but 80% of the beautification effect is reflected by the paint coating product. Faced with a wide variety of products on the market, how to choose a good quality latex paint? Qi Xinping from the Nippon Paint Xi'an Office explained this in detail.

Qi Xinping told everyone that as consumers, in addition to choosing a regular store or a branded enterprise, it is necessary to carefully observe whether the "authorization certificate" is sound and true and whether the deadline is within the authorized time; see if the product packaging is clearly printed, The colors are bright, and the factory name, product name, production date, and product category on the label must be very clear. In particular, the production date is printed instead of stamped. In addition, the inspection report should be made by an authoritative inspection agency.

"To identify latex paint, there are four steps to identify methods." Qi Xinping said, the first is "see", you can take a small stick in the paint inside stirring, the quality of the latex paint but off the layering, precipitation and other phenomena; The second is “拎”, you can use a stick to pick up latex paint, see if the downflow of latex paint can hang a long filament, whether uniform; the third is “sticky”, you can use two fingers to pick up, Good products feel very smooth, there is no sense of roughness and grain, dry and then take the water, good quality latex paint is not easy to fall, you need to squat down, poor quality paint is easier to collapse; the fourth is To "smell", good quality latex paint has no odor, inferior paint smells pungent, and it is very awkward. It is worth mentioning that some paints add spices in order to cover the harmful substances in the paint. Consumers should be particularly vigilant. The more concentrated the paint, the more attention should be paid to the quality of the paint.

Three trees paint paint latex paint home improvement

Stainless Steel M and V type Press fittinsg pipeline system is widely used in cold and hot water supply, heating supply, fire protection, 

medicinal gas, industrial petroleum pipeline system etc.

Compared with traditional pipeline system, it`s not only more economical, safer and healthier, but also easier and faster for installation

 with longer service life.

 

1. Stainless Steel V Type Press fittings range:

Coupling -- Equal coupling, Reducing coupling, Slip coupling, coupling with male/ female threads;

Elbow -- Equal elbow, Elbow 90°, Elbow 45°, Reducing elbow, Elbow with plain end, Elbow with wall plate, and Elbow with male/ female threads;

Tee -- Equal tee, Reducing tee, Tee with wall plate, and Tee with male/ female threads;

Others-- Pipe cap, Pipe Bridge and Flange connector.

2.  Stainless Steel V Type Press fittings Material:  Stainless steel 304L, Edelstahl 1.4306/ Edelstahl 1.4301, AISI304L, Inox304L;

Stainless steel 316L, Edelstahl1.4404, AISI316L, Inox316L;                                           

 Galvanized carbon steel, 1.0034C-Stahl,Kohlenstoffstahl, ACCIAIO AL CARBONIO.

  

3.  Stainless Steel V Type Press fittings Size: 3/8``-4``inch or as request,  pipe wall thickness: 1.0--2.0mm

Sizes range:

DVGW W534:1995: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108mm.

JIS G 3448-1980: 15.88, 22.22, 28.58, 34.00, 42.7, 48.6, 76.1, 88.9, 108mm.

4.  Stainless Steel V Type Press fittings Standard:

Stainless Steel V Type Press Fittings standard:  (DIN) DVGW W534-1995;   (JIS) JWWA G116:2001; GB/T 19228.1-2003

Stainless Steel  Pipe standard: DIN10312:2003; GB/T 19228.2-2003

O-ring sealing standard: CEN EN 681-1:2006; GBT 19228.3-2003

5.  O-Ring Seal: "Chlorinated butyl rubber" (CIIR), EPDM, HNBR, NBR and FKM, etc.

 EPDM (black): max working pressure 16bar, working temperature from -20℃ to 120℃,  

Suit medium: cold and hot water, compressed Air etc.

6.  Galvanization: all carbon steel pipe fittings are plated with rust-resistant zinc.

7.  Anneal: all stainless steel pipe fittings are annealed in inert gases before packing.

 

Stainless Steel Press Fittings Installation and Connection Order

 

Equipments And Quality Control

                                                                     Orderly Workshop          

            

                                                          Efficient Anneal Equipment

 

                                                                 Pressure Testing             

              

                                                                       Tensile Testing

Stainless Steel V Profile Press Fittings(DVGW)

Stainless Steel V Profile Press Fittings,Stainless Steel V Type Press Fittings,Stainless Steel Single Press Tee,V Profile Tee Press Pipe Fitting

WENZHOU KASIN VALVE PIPE FITTING CO., LTD. , http://www.kasinpressfitting.com