1. Construction procedure of wooden keel partition wall
Clear the grass ground → → line, find the rules → in the ground with bricks, cement mortar to make pillows (also known as kicker) → bombs, back to the ceiling and the main structure of the wall → vertical border wall bars → installation along the ground , along the top surgery 楞 立 立 立 立 立 立 立 立 立 立 立 vertical keel → nail horizontal keel → cover panel, set aside socket location and set up reinforced wood → cover panel processing.
2. Construction points of wooden keel partition wall
The wood dragon skeleton should use red and white pine wood with a size of 40 mm×70 mm. The spacing of the vertical keel is generally between 450 and 600 millimeters.
When installing along the ground and along the top, the two ends of the cylinder should be inserted into the brick wall at least l20mm to ensure that the partition wall is firmly connected with the original structural wall.
Glass brick partition wall construction process
Glass brick partition wall construction points:
Glass bricks should be built on the basis of two reinforced f6-f8 reinforcements. The base height should not exceed 150mm and the width should be more than 20mm above the glass brick thickness.
For the application of metal profiles at the top and the ends of the glass brick dividing wall, the width of the bad mouth should be greater than the thickness of the brick 10~18mm.
When the partition length or height is greater than 1500mm, one reinforcing bar is set in every two layers in the vertical direction (two steel bars are provided when the length and height are more than 1500mm), and one reinforcing bar is arranged every three vertical slots in the horizontal direction. Rebar extends not less than 35mm into the slot. The height of glass blocks reinforced with reinforced steel shall not exceed 4m.
The ends of the glass partition wall and the two sides of the metal profile shall have a slide joint with a width of no less than 4mm, and the joint shall be filled with linoleum. The glass partition board and the profile shall be left with expansion joints with a width of not less than 10mm to avoid damage to the glass brick partition wall.
The top layer of the glass brick should extend into the top metal profile notch 10 ~ 25mm, so as to avoid breaking the glass block due to rigid extrusion.
The joint between glass tiles shall not be less than 10mm and not more than 30mm.
The joints between glass bricks and profiles, profiles and buildings shall be sealed with elastic sealant.
Decoration Process Glass Socket Cement Glass Brick Process Glass
Baoji zhipu non-ferrous metal processing co., LTD., is a refractory metal export company, main processing single crystal furnace, vacuum furnace, sapphire, furnace, such as molybdenum, tungsten, tantalum, niobium, tungsten bars, tungsten, tungsten, tantalum, Tantalum Foil board, Tungsten Crucible, Molybdenum Crucible, Tantalum Crucible and so on temperature field instruments, pressure sensing device Tantalum Diaphragm of diaphragm, tantalum diaphragm, Tantalum Electrode, tantalum cathode and other parts processing, and use the most high-quality raw materials, equipped with advanced equipment and professional production team, can be customized according to requirements of various materials Tantalum Products , welcome to inquire, looking forward to your cooperation!
Tantalum Electrode
Tantalum Electrode,Economic Tantalum Electrode,Pure Tantalum Electrode,Classical Tantalum Electrode
Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd. , http://www.czpmow.com