Knife Gate Valve Installation Notes: 1. Knife gate valve before installation to check the valve cavity and the sealing surface and other parts, do not allow dirt or sand adhesion. 2. Bolts on the connection parts, require uniform tightening; 3. Check the packing Parts require compression, both to ensure that the packing seal, but also to ensure that the gate open flexible; 4. Users in the installation of the valve before the valve model must be calibrated, connecting the size and pay attention to the flow of media to ensure compliance with the requirements of the valve; 5. Users When installing the valve, must reserve the necessary space that the valve drives; 6. The wiring of the drive device should be according to the circuit diagram; 7. The knife gate valve must be regularly maintained and should not collide and squeeze freely, so as not to affect the sealing

DUPLEX STAINLESS STEEL

Duplex Stainless Steels Available

Yuhong Group supplies LDX2101, 2205, Ferralium 255, Zeron 100 and LDX2507 in the form of plate, sheet, strip, bar, pipe, tubing, pipe fittings, flanges and weld wire.

Duplex Stainless Steel Overview

Duplex Stainless Steels, also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite. These steels have a duplex microstructure which contributes to their high strength and high resistance to stress corrosion cracking. Due to their high content of chromium, nitrogen and molybdenum, duplex steels offer good resistance to local and uniform corrosion. Duplex stainless steels have good weldability.

Today, modern duplex stainless steels can be divided into three groups:
Lean Duplex such as LDX2101
Standard Duplex such as 2205, the work-horse grade accounting for more than 80% of duplex usage
Super Duplex such as Ferralium 255 and Zeron 100 and LDX2507

Of the duplex grades, duplex 2205 is the most widely used. However, the super duplex steels like Zeron® 100 and LDX2507 are excellent for servicing severe corrosive environments, such as offshore and marine applications. Lean duplex 2101 is available as an economic alternative to 300 series stainless steels.

What are the Characteristics of Duplex Stainless Steels ?
Very good resistance to uniform corrosion
Very good resistance to pitting and crevice corrosion
High resistance to stress corrosion cracking and corrosion fatigue
High mechanical strength
Good sulfide stress corrosion resistance
Good abrasion and erosion resistance
Good fatigue resistance high energy absorption
Low thermal expansion
Good weldability

In what Applications are Duplex Stainless Steels® used ?
Oil and gas equipment
Offshore technology
Seawater desalination plants
Chemical industry, especially when handling chlorides
Flue-gas cleaning
Desalination plants and seawater systems
Pulp and paper industry
Cargo tanks and pipe systems in chemical tankers
Firewalls and blast walls on offshore platforms
Bridges
Storage tanks
Pressure vessels, reactor tanks, and heat exchangers
Rotors, impellers and shafts

Duplex Steel Welded Pipe

Duplex Steel Welded Pipe,Stainless Steel Welded Pipe,Duplex Steel Butt Welded Pipe

YUHONG GROUP CO.,LIMITED , http://www.alloypipeline.com