Abstract Recently, the explosion in Tianjin Tanggu Development Zone has affected everyone's heart. The ruthless fire engulfed the fresh life, the number of victims continued to rise, and the disaster continued. Behind every fire is countless despair and tears. Next, the author will take a look for everyone...
Recently, the explosion in Tianjin Tanggu Development Zone has affected everyone's heart. The ruthless fire engulfed the fresh life, the number of victims continued to rise, and the disaster continued. Behind every fire is countless despair and tears. Next, the author will take stock of the six major fire incidents in the machine tool industry from 2014 to 2015. Event 1: The factory building of Dongyuan Town, Taizhou Investment Zone, Quanzhou City fired at 22:30 on July 7, 2014. A factory building in Dongyuan Town , Quanzhou Taiwanese Investment Zone, exploded. Not long after, the fire quickly spread to ignite the entire workshop. Fifteen fire officers and soldiers were on the scene to fight the fire. After 43 minutes of fighting, they controlled and extinguished the fire.
After the fire officers and soldiers arrived, they found that the fire was located in the second floor workshop, and the firearm was the heat transfer oil of the machine tool inside the factory.
Mr. Yuan, a worker of the factory, said that at that time, some employees were working in the workshop. They suddenly found that the heat transfer oil of the machine tool caught fire, quickly fled the scene, and promptly called the 119 alarm phone for help. In a short while, the entire workshop was swallowed up by the fire.
After 43 minutes of fighting, the fire was successfully extinguished, but fortunately no casualties were caused. However, the fire officers and soldiers considered that the fire was a heat-conducting oil, so they continued to use water guns to water the heat-conducting oil to prevent re-ignition.
Event 2: Fire in Shenwan Town, Zhongshan City Fire on the morning of September 16, 2014, a private factory in Nanzhen Village, Shenwan Town suddenly caught fire. Fortunately, it was found that the fire was timely and effectively controlled. The fire loss was not large. casualties.
At about 6:20 in the morning, Mr. Zhang got up and patrolled the factory. During the period, he found smoke from the factory. He immediately picked up the fire extinguisher and rushed to the factory. He was carrying the smoke of the monks and found the fire quickly against the fire. The source extinguishes the fire, effectively suppresses the open flame, and calls the boss to notify the police. At 6:37, the Shenwan full-time fire squadron was present. The scene was full of smog. The fire was in a corner of the factory. The burning material was wood and machine tools. The fire was basically controlled, but the fire continued to rise because the fire did not go out. smoke. The firefighters immediately fired a gun to save. After 15 minutes, the fire was completely extinguished and the smoke disappeared.
Mr. Zhang said that the total power supply of the machines in the factory has not been turned off. The workers only turned off the machine switches after work, but the machines were still powered. When he patrolled that morning, he found that the machine was smoking and igniting the surrounding wood. “There were 3 machine tools and some woods burned at the site, and the loss was about 5,000 yuan.†Mr. Peng, the head of the furniture factory, said that he suspected that it was a rain typhoon, and that the rain hit the machine tool and caused the short circuit of the machine tool to cause a fire.
Event 3: Fire in Xingzhou Road, Wuxi City
On October 19, 2014, a factory in Wuxi caught fire late at night, and the fire point turned out to be a machine tool. When the rest left the factory, the machine was also powered, igniting the hydraulic oil in the machine, causing a fire.
After receiving the news, the reporter quickly rushed to the scene of the incident. The fire broke out in a machinery factory on Xingzhou Road. When the reporter arrived, the fire was under control and the firefighters were clearing the scene. As the fire broke out around 0 am, nearby residents were already asleep. The first person to find the fire and the police was a man in the opposite shop of the machinery factory. It was about 11:57 pm. He saw the fire in the opposite factory and immediately dialed 119. After receiving the police, eight members of the Yuhua full-time fire brigade rushed to the machinery factory to extinguish the fire. When they arrived at the scene, the guard was sleeping at the time and did not know that there was a fire in the factory.
After the firefighters told him that there was a fire inside, he saw the fire in the factory and immediately opened the door. The firefighters went in and saw that a machine was on fire and immediately extinguished with a water gun. According to the owner of the machinery factory, "If someone did not find the fire in time, the loss of our factory will be great."
According to reports, the starting point is a machine tool, this machine has been faulty, and has been waiting for technicians to come to repair. The machine was filled with hydraulic oil. At that time, it was still powered. I didn't expect it to suddenly catch fire. Fortunately, there are some aluminum slices next to the machine, which are not flammable.
Event 4: The fire broke out in the factory workshop of Taihu West Road, Suzhou City. On November 17, 2014, the forging machine tool in the factory workshop was on fire and the smoke was rolling.
The location of the fire is Suzhou Rongwei Industry and Trade Co., Ltd. located at No. 127 Taihu West Road. The factory's doorman said that the cause of the fire was a oil leak in the forging machine in the factory, resulting in a small area of ​​fire, less than 20 minutes, was extinguished by the factory staff.
"The fire truck just left and let everyone stunned." A staff member at the scene said that the fire has been extinguished and the factory has resumed normal production. At the gate of the factory, there were no obvious signs of fire and no smell. From time to time, trucks loaded with machine tools were opened from the factory.
Master Li, who was on the opposite side of the fire factory, said: "At that time, I saw the direction of Rongwei's warehouse, and there was more than ten minutes of black smoke." Master Li said that the fire factory was recently relocated.
Event 5: The fire in the production workshop of Yangxin County in Huangshi City At 9 o'clock on the morning of December 14, 2014, the machine tool of Yangxinyi cotton and linen production workshop suddenly caught fire. Due to the enlargement of cotton and linen on the machine tool, the fire spread rapidly and the whole fire quickly spread throughout the workshop. And burn the top of the workshop, the 12 cotton and linen raw material warehouses, processing workshops and finished goods warehouses adjacent to the fire site are in jeopardy. The cotton and linen factory suffered heavy losses.
At 9:55, after receiving the fire alarm, the Huangshi Fire Brigade immediately dispatched 20 officers and men from the firefighting squadron's full-time command and fire squadron to the scene.
At 10:15, fire officers and soldiers arrived at the scene. According to the scene, the fire officers and soldiers set up three water gun positions, and fire fighting was carried out from inside, outside and above the factory. Since most of the beams and columns of the factory have been burned by the fire and lost their load-bearing capacity, the ceiling and bricks are dropped from time to time during the fire-fighting process. The fire officers and soldiers immediately transferred the battle positions and used the impact of the water gun to knock down the loose roof and bricks in the fire-extinguishing area. .
After 30 minutes, the open fire was completely extinguished. According to the characteristics of re-ignition of cotton and linen, the fire officers and soldiers immediately cleaned the cotton and linen in the burning area of ​​the fire.
Event 6: The fire broke out in the factory building of Da'an Industrial Park in Chongqing. At about 2 pm on July 13, 2015, the machine tool in a spring factory building in Da'an Industrial Park suddenly caught fire and the smoke was on the scene. After the person in charge of the factory discovered the fire, immediately call 119 fire police for help. The district fire brigade special squadron immediately dispatched three rescue vehicles, and 17 fire officers and soldiers quickly rushed to the scene to rescue.
After the fire officers and soldiers arrived at the scene, they found that smoke was blowing over the factory. After investigation, the fire point is the machine tool in the factory. Due to the high temperature of the production environment and the ignition of the hydraulic oil in the machine tool, the fire on the scene is large, and the flame burns to 5 meters high, causing the roof of the plant to be burned by about 60 square meters.
According to the on-site fire officers and soldiers, because the hydraulic oil continually lasts after ignition, if the fire is not controlled in time, it will easily lead to explosion or spread. The situation was urgent and the fire officers and soldiers immediately began rescue. Inside and outside the workshop, the water gun and the foam gun were simultaneously exerted. After 20 minutes, the fire was finally controlled. Fortunately, there were no casualties.
Conclusion:
Fire incidents in the machine tool industry are not uncommon. Everyone should increase their emphasis on such incidents. Professionals should be inspected regularly to check the machine equipment and to inspect the production environment. Staff should standardize the use and proper placement of mechanical equipment. Always turn off the power when you leave, clean the work site, and carefully check for any omissions. Fire-fighting equipment should be equipped at the working point and assigned to guard. If you encounter an emergency, you should promptly report to the police. To avoid the occurrence of fires, the most important thing is to increase vigilance and prevent problems before they occur.
Pneumatic Lubricator: reduce the internal friction in tools or equipment by releasing a controlled mist of oil into the compressed air. This is often done last and/or right before the component needing lubrication.
Pneumatic Air Lubricator, Airtac Pneumatic Lubricator, SMC Pneumatic Lubricator, FESTO Pneumatic Lubricator
NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com