As we all know, the whole cabinet is one of the high-end decoration in the current kitchen. The overall effect and the value of the upper grades are unanimously praised by domestic and foreign owners. The production of the stove is the most important step in the overall cabinet design. So, what direction do the whole cabinet stove, which processes standard whole cabinet countertops have it? Now, Xiao Bian give you a good introduction to the whole cabinet stove to do in what direction.
1. Craft standard of the whole countertop
1. In what direction is the whole cabinet stove
According to Wuxing Fengshui, the property of the cooktop itself is fire, so the orientation of the cooktop should be in the east, so that it can match the wind direction; if your kitchen has a window, you must not use the position under the window sill as a cooktop, except It is easy to get oil stains on the windows, and the fire is easily blown out by the wind. Whoever regrets the design.
2. The length standard of the whole cabinet countertop
Normally, the length of a single table is generally not more than 3 meters; if it exceeds this specification, it should be made. Splice to make up. The width of the table should be adjusted according to the length, generally based on the two types of 550 and 600, and the thickness is about 12.7 mm and 27 mm.
3. The width standard of the whole cabinet countertop
If the countertop of the whole cabinet is counted up from the bottom of the wall cabinet, the high dimension is 600 mm as the standard, and the low dimension is 500 mm as the standard. But the stainless steel countertop may be a little different. In order to fit the height of housewives, the width of the countertop should not be less than 900 * 460 mm.
4. The width of the sink of the countertop of the whole cabinet
The width of the sink is restricted by the width of the countertop, which determines the width of the sink. In the design, the width of the sink should be reduced by about 100 mm on the basis of the width of the countertop, and the approximate range is between 500-600 mm; for small units, about 430-480 mm is also feasible.
5. The edge design of the countertop of the whole cabinet
The edges of the countertops like marble and stainless steel have sharp edges and corners, which poses certain safety risks. For example: small round edge, straight edge waterproof line, small round waterproof line, small hypotenuse waterproof line, etc. Beveling design should be done at the edge, so that it can have a certain curvature, for the elderly and children at home, it is not easy to hurt people.
Article Summary: The above is about the whole cabinet stove to do what all the content and direction of the overall process standards of the cabinet table, we want to be helpful. The above dimensions are for your reference only, and everything is actually based on the characteristics of the apartment.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Whole cabinet stove
R421a , replacement for R22
We are manufacturer of Refrigerant Gas R421a in China, if you want to buy Mixed Refrigerant Gas R421a, R421a Refrigerant ,High Quality R421a Refrigerant please contact us.
Refrigerant Gas R421a,Mixed Refrigerant Gas R421a,R421a Refrigerant,High Quality R421a Refrigerant
R421a
Refrigerant Gas R421a,Mixed Refrigerant Gas R421a,R421a Refrigerant,High Quality R421a Refrigerant
ZHEJIANG ZHONGLAN REFRIGERATION TECHNOLOGY CO.,LTD , https://www.uiszl.com