Because the tile floor is not easy to infiltrate, the ground itself is relatively flat and smooth, so many people are wondering whether they can lay industrial floor paint on the tile floor. Today we will introduce the characteristics of the epoxy floor, and solve the doubt in everyone's hearts.
According to floor experts' introduction, the epoxy resin floor paint is characterized by its high strength, wear resistance, and beautiful appearance, and has no seams, solid texture, good chemical resistance, corrosion resistance, waterproof, dustproof, and easy maintenance. The advantages of low maintenance cost are now not only applied to clean workshops, sterile rooms, but also gradually occupy the ground decoration market. However, we know that epoxy floor paints are mostly carried out on cement floors, and that the gaps on the tile floor due to the gaps will inevitably increase the difficulty of construction. A brief analysis is now done on how to make epoxy resin floor coatings on tiled floors in order to lift a series of unnecessary concerns about the service life, floor delamination, and evenness of tile floor construction.
1. Regardless of the concrete floor or tile floor, we must polish, and the tile floor must be deep polished, because the tile floor material itself is relatively dense, not easy to penetrate and bond, only the ground polished rough, can enhance the ground Floor paint and floor bonding effect. In contrast to the ground, which requires a high level of flatness to be worn, it is necessary to solve the gap in the tile spacing. This is a relatively time-consuming but very important part.
2, epoxy floor paint primer construction. Because the epoxy floor paint primer plays a role in the coating of the floor paint, the construction must be sufficient and uniform to enhance the strength and wear resistance of the epoxy floor primer so as to avoid shelling. The occurrence of delamination and other phenomena.
3, epoxy floor paint mortar layer must be thickened.
4, in the epoxy floor paint topcoat construction of this ring, according to the actual needs of customers using roller coating, brushing, coating and other methods of construction, in order to achieve different results.
Rotor pump usually beed used to transfer high viscosity liquid. we have rotary lobe pump, roots pump, internal gear pump. stainless steel rotary lobe pump is one kind of food grade pump, pump be used to transfer many kind of food liquid, like: juice, beer, wine, milk, honey, molasses, sugar liquid etc. roots pump is also be called lobed rotor pump, this pump have big capacity and high pressure, it's high suction let pump powerful. pump can be usde to transfer high viscosity lliquid and thick liquid, like: toothpaste, glue, resin, bitumen etc, it's stainless steel material pump also can be used to transfer high viscosity food liquid. NYP series internal gear pump with the heat insulation jacket, it's usually be used to transfer crystallized high viscosity liquid.
Lobe Pump,Lobe Gear Pump,Vogelsang Rotary Lobe Pump,Lobe Rotor Pump
Hengshui Yuanhan Trading Co.,Ltd , https://www.yuanhanpump.com