15000 air volume marble tabletop resin glue deodorizer equipment manufacturers photo-oxidation equipment can be customized according to customer needs, can be used to different air volume equipment, 5000 air volume, 10000 air volume, 15000 air volume, 20000 air volume, 30,000 air volume and other large equipment, The number of lamps is 20, 40, 60, 80, 120, and so on. Photo Oxygen Catalytic Photo Oxidation Deodorization equipment is widely used in decontamination and purification of various odorous gases such as refineries, rubber plants, chemical plants, pharmaceutical plants, sewage treatment plants, garbage transfer stations, etc. It is suitable for bio-technical amines, paint waste and other organic waste gases to remove benzene and deodorize. The product has the advantages of high efficiency in eliminating bad odor, low running cost, no pretreatment, strong habit, long service life and high purification power of over 90%. Photooxidation equipment is self-produced and sold, and you are advised to find a physical manufacturer. Chunhui is guaranteed to be tailor-made for your planning. The targeted exhaust gas treatment can be tested by the Environmental Protection Agency. This equipment has no secondary pollution and improves purification.
15000 air volume marble tabletop resin glue deodorization purifier equipment manufacturer rubber factory light oxygen deodorization system 15000 air volume device pipeline planning, the temperature of the exhaust gas is controlled below 80 °C, because the temperature is too high will affect the UV light oxygen purifier purification equipment and Equipment life. The purifier can be installed indoors or outside, but there should be enough space for protection and repair; the equipment is regularly protected against cleaning according to the condition of the application. The purifier device is in front of the fan, and the front end of the purifier should have large particles in the exhaust gas of the desulfurizer to ensure the cleanliness and service life of the purifier and prolong the protection time. When the purifier is above the house, it should be fastened to the home; the connection between the purifier and the exhaust duct must be sealed; the purifier box should be grounded firmly; the UV tube should not be bumped during the installation. It is forbidden to fall into the purifier; the connection between the purifier body and the electrical control box should be reliable. The external power supply of the device is 220V. Because there is strong ultraviolet light in the device, dark sunglasses should be worn during maintenance to prevent eye damage.
The Uv photo-oxygen purifier generally requires a device to be used in a place with good ventilation conditions, and also in the presence of a natural light source, so that the catalyst inside the device can be touched with the ultraviolet light in the natural light source to generate Oxidizing ozone substances, so that the urea machine can achieve a more ambitious oxidation treatment. The primary application skill of photocatalytic equipment is the photocatalyst skill we often say. This skill requirement uses special bands of UV lamps for installation and planning. The workshops with different air volumes have a significant impact on the number and layout of UV lamps. Under normal conditions, the pressure of the fan can be used to collect the exhaust gas of the u machine into the interior of the photocatalytic device, so that the relatively high concentration of the exhaust gas will start the fen cracking and purifying operation under the influence of the beam under intense ultraviolet light. The advantage of this type of equipment is that it can be used in a low-concentration, high-volume environment, and can be more ambitious. There is no need for special protection and handling in daily life. It is possible to check regularly, check the specific condition of the lamp and the operation status of the catalyst, but if it is not the operator, do not go to the work area to prevent some dangers from the normal operation of the equipment.
The application of long-lasting photo-oxidation exhaust gas purification equipment, u machine exhaust gas treatment features: u machine exhaust gas generally has the characteristics of flammable and explosive, toxic and harmful, insoluble in water, soluble in u machine solvent, and difficult to handle. In the treatment of the exhaust gas of the u machine, various principles such as the u-type exhaust gas adsorption treatment method, the catalytic incineration method, the catalytic oxidation method, the acid-base neutralization method, the plasma method, and the like are selected. It is generally recommended to use the plasma method because the low-temperature plasma method has the characteristics of high power removal and high convenience. The better u machine exhaust gas treatment method is the catalytic oxidation purification system, and the exhaust gas treatment planning is meticulous, and the layer purification and filtration of the exhaust gas has a good effect.
About "15000 air volume marble tabletop resin glue deodorization purifier equipment manufacturers" details are provided by Chunhui Xiaobian, Chunhui environmental consulting order re line 17703379917 (WeChat same number) QQ Wang manager Chunhui environmental protection waiting for your call inquiry order. Our company is based on the quality N.1, reasonable price, abide by the contract, technical consultation, on behalf of the semi-mailing guidelines, sincerely for the broad user service, the company also produces pulse bag filter, cyclone dust collector, wet desulfurization dust collector, electrostatic dust removal And dust bag, dust skeleton, pulse solenoid valve, pulse controller, cylinder, bag hanging, scribe pipe, screw conveyor, unloader and other dust collector accessories, set the same product purification in one, so that users run hundreds It is better to go home than to buy a product, not only to buy products but also to technology and trust. High quality and low price, to ensure that users save several times the money, buy our quality products, the company's product quality assurance, timely delivery. "User satisfaction, my pursuit" is the main purpose of our company's after-sales service.
Http://news.chinawj.com.cn
Description:Kevlar fiber Packing is aramid fiber impregnated with PTFE emulsion lubricant processing woven square section of the filler with a mandrel,the strength and modulus of the filler wire is known,can with stand harsh media and pressure,and long life,good sealing effect,often used for pulp,mortar,tin,power plants and other bad places the pump seal.
Temperature:-200~300℃
Pressure:20~30MPa
VELOCITY:0~25M/S
PH range:2~12
Kevlar Fiber Packing
Kevlar Fiber Packing,Aramid Fiber Packing,Kevlar Packing With Ptfe,Kevlar Fiber Gland Packing
HEBEI HENGDA SEALING MATERIALS CO.,LTD. , https://www.hengdasealing.com