- Model NO.: HLYD067
- Manufacturing Arts: Welding
- Use: Wireline Drilling
- Specification: SGS
- HS Code: 82071990
- Kind: Diamond Drill
- Usage: Stone Cutting, Drilling, Abrasive and Carving, Engineering Material
- Trademark: HOLLYLAND
- Origin: China
Locking Couplings, Spearhead Point, Compression Spring, Detent Plunger, Spirol Pin,
Spearhead Base, Latch Retracting Case, Spring Clamp, Upper Latch Body, Latch Spring,
Latch, Adapter Couplings, Landing rings, Lower Latch Body, Spindle, Outer Tubes,
Inner Tubes, stabilizers, Core Lifter (cases), Stop rings, Core springs
And other drilling tools: Complete Inner tube head, Overshot assembly, Alloy wrench,
Diamond Wrench, Drill rod etc
Wire-line drilling tools can lift drill core from drill rods without picking up bit.
Their advantages are higher penetration, higher core recovery ratio, longer bit life
And lower labour intensity, the advantages get more clear with the increasing of hole depth.
1050 1060 1100 1235 belong to pure aluminum.The content of Al is above 99.5%.Thickness of Aluminum Sheet is from 0.2mm to 200mm.The width is from 500mm to 2000mm and the length is from 500mm to 9000mm.The corrosion resistance of 1050 1060 1100 1235 alloy is the highest among all of the series.But the strength of this kind alloy is not strong enough.
The application:
1. Lighting and decorative lighting
2. Solar reflector
3. Architectural appearance
4. Interior deoration: ceiling, building wall,roofing,photo frame and so on.
5. Furniture,cabinet
6. Elevator
7. Label,nameplate,luggage
8. Decoration of the inside and outside of car
9. Domestic appliance such as freidge, microwave and so on
10. Aerospace and military applications such as aircraft manufacturing, spacecraft manufacturing, artificial satellite and so on.
3003 3004 3005 3105 have excellent rust-proof capability.The basis content is Manganese element.This alloy is widly used in humid environment. Such as freigde,air conditioner and vehicle bottom. 3000 series price is higher than 1000 series.
5005 5052 5754 have low density and they have high tensile strength.and high elongation.They are widly used in aircraft tank and other oxidation deep processing.
8011 is the most common alloy used as cap material.And also used as radiator material. This alloy is used mostly as foil.
Aluminum Plain Sheet,Thin Aluminum Sheet,Standard Aluminum Sheet
Henan Everwin Trade Co., Ltd. , http://www.ewaluminium.com