Bathroom waterproof decoration had to see the 9 details

Nowadays, how bathroom decoration reflects its comfort and safety has become a focus of decoration. When interviewed by reporters in the home improvement industry, the reporter learned that there are many details involved in the decoration of the bathroom. If not handled properly, it will not only directly affect the quality of future home life, but will also affect the mood.


Carrie bathroom

Bathroom decoration need to pay attention to the following 9 points:

1. Ceiling: Because of the heavy moisture in the bathroom, choose materials that have waterproof, anti-corrosion, and anti-rust properties.

2, the ground: in the paving tiles before, be sure to do a good job of waterproofing; after the tile is laid, to ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope toward the floor drain; the ground must be done after laying tiles Closed water experiment, the time must be guaranteed at least 24 hours; laying tiles should pay attention to the seams and alignment of the wall tiles, to ensure the overall sense of the entire bathroom, so as not to produce a visually cluttered impression.

3. Wall: The tiles on the wall should also be waterproof and waterproof. Also, the tiles should be flat and must be aligned with the floor tiles to ensure the integrity of the wall and the floor. The incision of the tile should be small and appropriate, and the flange cover on the water feeder should be convenient to cover the incision, making the appearance perfect.

4, doors and windows: the best bathroom with windows to facilitate ventilation; if there is no window, with particular attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.

5. Circuit laying: The wire joints of the bathroom must be tin-plated and must be wrapped with waterproof tape and insulating tape successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the position Also depending on the size and location of the appliance, to ensure the use of convenient and reasonable.

6, waterway renovation: Bathroom water supply and drainage line is best not to make too much changes, if you want to change, depending on the specific circumstances, such as washing machine model, the location of the water will be different.

7, sanitary ware installation: the best in the decoration before the water hole distance, according to the size of the selected bath, bath room, toilet, wash basin and other sanitary ware, so as not to fit in the size of the decoration is inappropriate; toilet seat installation should be used first The mud is sealed and then fixed with expansion screws or glass glue so that it can be easily repaired when the toilet is clogged.

8. Ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must be provided with a retrograde gate to prevent backflow of dirty air.

9. Greening: Adding anger. The bathroom should not be a corner forgotten by the green. When decorating, you can choose some shade-tolerant and hi-potted pots to be placed in the bathroom, making it a little more angry and fresh.

Hydroelectric renovation concealment project Yu bathroom window glass switch home decoration socket glass brick glass sliding door glass door bathroom sliding door bathroom tile bathroom door bathroom wall tile bathroom size bathroom floor tile bathroom sink bathroom toilet bathroom waterproof bathroom door size tile adhesive

Abrasive & Refractory

Silicon Carbide,Black Fused Alumina,Brown Fused Alumina

Carbon Additive,Activated Carbon Co., Ltd. , http://www.nhactivatedcharcoal.com

Posted on