1. Keep the floor dry and clean. Do not allow the mop to be wetted with water or scrubbed with alkaline water or soapy water so as not to damage the brightness of the paint and damage the paint film. In case of ash or dirt, use a dry mop or wipe with a wrung wet mop. Wax once a month (or two months) (wipe the water vapor and smudges before waxing).
2. In the event of heat or other water leaking on the ground, it must be wiped clean in time, and it cannot be directly sun-baked or baked by electric oven, so as to avoid excessive drying and cracking of the floor.
3, the painted floor can not live for a long time, should not be covered with plastic sheets or newspapers, the time will be a long film paint sticky, loss of luster, and avoid hot water pots, rice cookers and other items directly on the floor surface, Use a wooden board or a mat to protect it from damage.
4, part of the board accidentally stained with stains should be promptly removed, if oil traces available rag or mop, warm water or a small amount of detergent to wipe, you can also use neutral soapy water plus a little washing spirit scrub. If the stain is serious, this method is ineffective and can be wiped with high quality sandpaper or steel wool. If it is a smear of a drug, beverage or pigment, it must be removed before the stain has penetrated the wooden surface. The cleaning method is to wipe it with a soft cloth dipped in furniture wax. If it is still ineffective, it must be rubbed with steel wool and furniture wax. If the surface of the floor is damaged by cigarettes, wipe it with a soft cloth impregnated with furniture wax to restore light. If it is contaminated with ink, it should be wiped with a soft wax dip cloth in time. If it is ineffective, it can be wiped with steel wool and furniture wax.
5, after the laying of the paint floor, try to reduce the direct sun, so as not to paint too much ultraviolet radiation, premature cracking and aging. Put furniture application rubber or other soft objects on the floor to avoid scratching the floor paint.
6, the floor in the use of the process, if found individual floor uplift or fall off, should promptly pick up the floor, remove the old plastic and ash, coated with new rubber, compaction; if the individual floor paint film damage or dew, available 400 Water sandpaper, soap, and water are sanded and then wiped clean. After drying, apply a complementary color. After the color is dry, apply a coat of paint. After drying for 24 hours, grind the surface with 400-grit water sandpaper and polish with wax.
2. In the event of heat or other water leaking on the ground, it must be wiped clean in time, and it cannot be directly sun-baked or baked by electric oven, so as to avoid excessive drying and cracking of the floor.
3, the painted floor can not live for a long time, should not be covered with plastic sheets or newspapers, the time will be a long film paint sticky, loss of luster, and avoid hot water pots, rice cookers and other items directly on the floor surface, Use a wooden board or a mat to protect it from damage.
4, part of the board accidentally stained with stains should be promptly removed, if oil traces available rag or mop, warm water or a small amount of detergent to wipe, you can also use neutral soapy water plus a little washing spirit scrub. If the stain is serious, this method is ineffective and can be wiped with high quality sandpaper or steel wool. If it is a smear of a drug, beverage or pigment, it must be removed before the stain has penetrated the wooden surface. The cleaning method is to wipe it with a soft cloth dipped in furniture wax. If it is still ineffective, it must be rubbed with steel wool and furniture wax. If the surface of the floor is damaged by cigarettes, wipe it with a soft cloth impregnated with furniture wax to restore light. If it is contaminated with ink, it should be wiped with a soft wax dip cloth in time. If it is ineffective, it can be wiped with steel wool and furniture wax.
5, after the laying of the paint floor, try to reduce the direct sun, so as not to paint too much ultraviolet radiation, premature cracking and aging. Put furniture application rubber or other soft objects on the floor to avoid scratching the floor paint.
6, the floor in the use of the process, if found individual floor uplift or fall off, should promptly pick up the floor, remove the old plastic and ash, coated with new rubber, compaction; if the individual floor paint film damage or dew, available 400 Water sandpaper, soap, and water are sanded and then wiped clean. After drying, apply a complementary color. After the color is dry, apply a coat of paint. After drying for 24 hours, grind the surface with 400-grit water sandpaper and polish with wax.
Nature floor del floor paint furniture heating
OEM Chair Gas Spring,Gas Lift for Chair,Chair Gas Spring
Changzhou Juteng Gas Spring Co., Ltd. , http://www.gassprings-china.com